Automatic Foam soap dispenser

Shredding the foam will not only make the recycling process easy, but will also greatly reduce the transport cost, and become a recyclable commodity of high value.org is a green company providing foam recycling services. The material can then be easily transported to a required factory to be remolded again with heat and pressure into new EPS products. The question to be asked is how should we recycle it? Is shredding it preferable, or compacting it, or maybe melting it would be best?

 If they intend to further melt and remold the foam to different plastic products, then turning the scrap foam into logs using a compactor is the better choice.foamrecycle. It can also be extruded into plastic pellets or Hand disinfection soap dispenser used as the building material in the filling agent or as adhesive. The answer to the question of which machine or method to use – Automatic sensor soap dispenser compactor, shredder or densifier lies in the purpose of the recycled foam. Being a plastic-like material, EPS can be heated, melted and molded into many plastic items by being forced into palletizing extruders machines. The transportation of the logs is cost effective and easy due to its light weight. The machine uses heat to melt the foam, then pressing it through a narrow outlet.. Some compactors can achieve volume reduction of up to 50 to 1 its original volume, which is reduction of about 95% its original size. If buried in the ground, it takes up a lot of space, if burned it creates unpleasant ashes, so what is the best method to recycle Styrofoam or to dispose of it?

 There is a misconception that EPS is non-recyclable. After compacting the foam it can be re-melted to make pellets for the application of injection molded parts. However, the material is actually easily recycled due to its light weight and being mostly made of air. The scrap foam pieces are placed into a compactor that will compress and press it, squeezing out the excess air. Located in San Pablo, in the heart of Silicon Valley, the company offers drop off or pick up of excess surplus foam as well as foam recycling equipment rental. The end result is densified foam logs that can be stacked on top of each other.

Styrofoam, also known as Expanded Polystyrene, EPS or recycle #6, is commonly used as trays, plates and cups in the food industry and as a great packaging material due to its light weight, low cost production rates, its sustainability and durability.

 No matter which machine or method is used to recycle the foam, there is no doubt that we do need to recycle. If the company or organization will use the recycled foam as fillers, or if they will use it for further mixing the foam with concrete to create lightweight building materials then shredder is the better choice.

 But EPS can also be melted by a method of feeding it into a thermal densifier. The end product is a solidified long “rope like” melted material. Storing the logs on site is also easy and does not take up a lot of space. The logs can be cut to the desired length, so that they can be placed easily into a pellet. Compacting EPS is especially beneficial in cases where there is a need to transport it to a recycling and reuse facility.